Home & Garden

Battery Reconditioning : Bring Old Batteries Back To Life Again.

Last Updated On: Jul 1, 2020 @ 7:50 am

Battery reconditioning

The battery reconditioning of the old battery is quite simple. Up to 70% of the time can be successful in reconditioning a dead battery.

You need to learn how to recondition batteries, but it doesn’t take too long with the right instructions. And the great thing is, you don’t have to spend a fortune on testing and repairing equipment.

Simple techniques of battery reconditioning is to restore the dead battery to 100% of its original charge capacity are readily available.

This isn’t that hard. Keep in mind that rechargeable batteries allow users to forget about power cables that prevent power tools from being manipulated and restrict the movement of any device to the length of the cable from the power source.

Think about how many electrical devices are portable today. Okay, the type of battery may vary – whether it’s for a forklift, a cell phone, a golf cart, iPods, or power tools, just to mention a few, but there are quick and easy ways to revive each type of battery.

Battery Reconditioning

Again, I would like to stress that the methods are cost-effective, whether for purely personal or business purposes.

Learning how to recondition batteries like motorcycle batteries, automotive batteries, marine batteries, and motorized wheelchair batteries is of great interest to people in every country.

In the United States, these batteries are expensive for any user, and there will be an ever-increasing market for refurbished batteries when considering the cost of a new one.

Conversely, there is a growing market in third-world countries where the price of a new battery is also prohibitive.

It is important to bear in mind that the unhealthful (if not dead) condition of the battery may be due to its charger, which has often been defective.

But, more often than not, it’s the battery that kills the charger. Unfortunately, it’s common to find people replacing a perfectly good charger, believing that the charger is a problem, only to find it destroyed by the real culprit.

Once the ‘natural’ lifespan of the battery has been exhausted, the battery must be properly reconditioned so that it does not pose a threat to the equipment and the chargers.

It is also essential to know exactly how to measure the charging capacity of the battery in question. Of course, this varies, but once you know exactly how much energy the battery will store for a while, you can evaluate the improvement you’ve made in its performance.

The importance of knowing how to reverse an inverted cell can not be overstated. This is one of the first things to evaluate about a dead battery.

Battery Reconditioning

You ‘re not going to be able to do anything with it until you’ve fixed the inverted cell.

One of the best things to understand is why the battery needs to be reconditioned. A new battery may have a memory effect, but repackaging the battery should completely dispel this effect.

Now that’s a feat, and it means you can continually rejuvenate suspicious batteries.

Battery reconditioning is cheap.

Battery reconditioning would normally cost you a few cents of electricity per unit, often nothing at all.

Apart from saving money on the batteries, you use yourself (which can certainly amount to hundreds, if not thousands, of dollars), the repackaging of the batteries is actually a good opportunity for small businesses. Some people just do it part-time and make a very tidy profit.

Suppose dead batteries must be thrown away, so even if you can only repair one in four, you ‘re making some money free of charge and with a minimum of effort.

Do it as a business if you want to do it full-time or part-time.

If you decide to make money (rather than just save) from battery reconditioning methods, it’s really just a matter of finding sources and/or disseminating news.

Good sources of faded batteries can be found, re-energized or upgraded, and sold at a good price on eBay, your local garage, auto parts dealer, or the like. (By the way, you’ll always be able to unload seemingly ‘dead’ batteries from mechanics and garages for free or very little.)

Option two is to find customers-you’ll probably need to advertise-and fix their batteries for them at a service price. Or just do both of them!

Cordless Power Across / Batteries need to be fixed.

Nowadays, so many appliances are cordless, there’s no end to a battery doctor’s business. iPods, mobile phones, laptops, power tools, forklifts, golf carts, blackberries, and so on, all rely on wireless power.

Then you’ve got the car, the motorcycle, the marine, and the motorized wheelchair batteries. And the new batteries are expensive, just take a look at your local store or online.

The battery is often the most expensive part of the power supply. (In the not too distant future, hybrid cars are likely to become a mass product.

Success Rate Recovery

Some of the batteries are beyond repair. Lithium batteries are known to be non-correctable if they are left too long without being used.

Sometimes they reach a particular point, there’s really no return, so it depends on whether you catch them fast enough. Other batteries have a much higher success rate for reconditioning. Nickel-based and lead-acid batteries are generally the winners.

Costs of:

A professional battery reconditioning guide is going to set you back around $45. They are available for download on the Internet. On top of that, you should expect $160 to be spent on a battery analyzer that is computer-controlled.

You can do without it and use a voltmeter if all you want to do is fix one or two batteries of your own from time to time. More than that, and you’re really going to have to consider investing in an analyzer.

Battery Reconditioning


The International Battery Federation estimates that three-quarters of the batteries are being thrown away needlessly. Offering a battery reconditioning service will never see you short of customers, even if they’re just friends and family.

The word will spread quickly. One of the best things reconditioning battery is that you can analyze how much of the original battery charge you restored and passed on to the customer. So that’s never the case of ‘may be all right.

Give it a try and see how it works.” Customers find it very impressive when you can tell them exactly how much you can achieve in battery reconditioning like, ‘Back to 96 percent of full capacity.’ Of course, you might just want to save money by repackaging your own home batteries.

Battery reconditioning requires just a little knowledge and a few cheap tools. It’s just great to use it around one’s own home and for family and friends. It could even turn into a nice little business.

Woodworking Projects And Battery Reconditioning is few of the skillsets where person can set up his or her own shop and can make good living out of it.

How long does it take to recondition a battery?

Generally 4 hours is ideal time, but there are many factors like how old is battery, what kind of battery it is, what is the size of battery, so proper answer is it depends who long it will take to recondition a battery.

Home & Garden

12000 Shed Plans : How to build sheds like lego bricks ?

Last Updated On: Jul 1, 2020 @ 7:52 am

How to build a shed

In Woodworking learning how to build a shed has many advantages over buying an expensive vinyl or metal shed. At first glance, this may seem like a difficult task, but once you know how to build a shed; it will not be as complicated as you think.

The main aspects to consider are space, size, and of course, budget. The following is a guide on how to build a shed. If you are not sure how to build a shed, it can help you plan:

1. First, develop a shed plans :

Like in all construction processes, everything must start with a specific plan. Put forward a basic blueprint. Get a piece of paper and do some simple engineering. Include sketches and dimensions, and use this as a guide to building an ideal shed.

Choosing a shed that can provide years of use and high durability can be daunting. However, through some research, this process can reduce the difficult task. Many factors should be considered when purchasing sheds and determining which shed plans will be used.

One of the factors that should be considered is the location of the building relative to the house.

This will help individuals determine the size of the shed and the plan that can be used to create the shed. Naturally, sheds of different sizes will carry different price tags.

When determining the location of the shed, it is important to think carefully for a long time. Often, putting a beautiful shed in the wrong place becomes useless.

12000 Shed Plans ebook: contact us via email we will send you ebook with lots of free shed plans

It is important that the homeowner must choose a flat place that will not accumulate rainwater or other weather damage.

If necessary, homeowners should consider using dirt or even concrete to create a more durable and useful surface for the shed. It is also important that the shed is not too far from home, as it may be difficult to move supplies in and out.

It is also important to consider any weather conditions that may be difficult to reach the shed. For those who must endure cold or muddy conditions, stepping stones may help make the shed more accessible.

Once the homeowner has determined the proper location of the shed, it is important to determine the size and capacity of the shed. Although many sheds follow typical guidelines, the average size of some sheds is much larger or smaller.

You can also create a plan that better suits the needs of the homeowner. Nevertheless, shed kits and prefabricated sheds will provide homeowners with fewer options for size changes.

You can also create personalized shed sizes by using online shed plans and auxiliary tools. People who build their own sheds save an average of 60-70% than those who buy ready-made sheds.

Whatever the purpose of the shed, it is important to choose a plan that matches the design of the house. This will make the shed look more natural and will not damage the aesthetics of the house.

The size should also be chosen carefully because the shed is too large or too small will seriously limit the use and purpose of the shed. For many people, it may be feasible to create a shed slightly larger than needed to accommodate future storage needs.

2. Cost-effectiveness

Another important consideration is your budget. Before purchasing materials, you need to provide a price list to avoid a final financial shortage.

You have read it a million times, but let me emphasize again: quality is better than quantity. Who would want to build a shed now, and found it to be broken after a few months?

12000 Shed Plans ebook: contact us via email we will send you ebook with lots of free shed plans

When planning how to build a shed, the quality of the materials to be used must be considered. This is important. High-quality materials may cost more, but the quality and service life of the shed will be better.

3. Consider the amount of available space.

 Accurately measure the space intended for the shed to ensure that it does not take up more or less space than you want.

This is why the shed plan is important, so you can determine the exact dimensions of the shed before you start construction.

Provide enough space for you to enter and exit the shed comfortably and choose a safe and friendly location suitable for the whole family to visit.

4. Lay a solid foundation for the shed.

Once you have completed the research and have a good understanding of how to build the shed, and have determined the shed plan and collected all the materials and necessary supplies, you can start the construction process.

After the corner is installed in place, install the building pier (or deck) by drilling down a few inches into the ground. To ensure stability, use cement to keep it firm. Make sure that the additional dock in the middle is the main support for the shed.

The number of supports required usually depends on the overall size of the shed. Importantly, you need to determine whether the foundation is sufficient to stabilize the entire structure.

5. Flooring.

To make the backyard shed square, the corner should be connected with the wooden board. Subsequently, the remaining planks are used to complete the floor of the shed. Make sure there is no gap or visible space between the two.

12000 Shed Plans ebook: contact us via email we will send you ebook with lots of free shed plans

6. Fix the frame.

 This is the most challenging step of how to build a shed, always putting the wall shelf from bottom to top. Tighten all screws to ensure a certain space for doors and windows.

After completing the framing process, secure the top beam. From the front wall to the rear wall, carefully place the beams, and then start adding the roof.

Remember, this time, the corners, floor, frame and beams are all connected together as one entity. Carefully inspect the joists, screws and all other connected areas.

Make sure the parts are tightened or nailed to prevent the shed from collapsing. Someone helps you fix the parts, especially during the composition process.

7. Wall and roof sheathing.

Although you must always consider the exterior design of the house, there are many coverage options available. For the side, you can make a layer of wood board treated with stains or varnish of your choice. You may also set the sides with vinyl.

Another popular alternative is asphalt shingles. Install them carefully and then continue to create dripping edges.

12000 Shed Plans ebook: contact us via email we will send you ebook with lots of free shed plans

8. Finalize doors and windows.

 In order to promote ventilation in the backyard shed, please construct windows to supply air. The door should be large enough to accommodate the largest object to be stored in the shed.

That’s it a simple guide on how to build a shack! You don’t need to be an engineer to build a shed. Just focus on developing or buying a quality shed plan, determine a budget, collect tools and materials and start building.

The whole family can help in certain ways, making it a family-friendly activity. Not only can you save money, but you will end up with a hut with a personal family atmosphere.

Is it cheaper to build or buy a shed?

shed plans

Buying a Shed can save you time but will cost you lot of money, and hiring a contractor can cost even more. Normal Shed cost around $300-$500 usd on the other side hiring a builder or contractor it can cost upto $2500-$3500 including labor, materials and other cost.

Home & Garden

16000 Woodworking projects : Thе World’s Lаrgеѕt Dаtаbаѕе for Wооdwоrkіng Prоjесtѕ

Last Updated On: Jul 1, 2020 @ 7:51 am

Woodworking Projects Thе World’s Lаrgеѕt Dаtаbаѕе for woodworking projects (16000). Keep reading the article until end as we will be providing a 50 free Woodworking projects ebook via email If get contacted via email.

Creating something on your own is one of the best feelings. This is the reason why DIYs are considered to be the best concept. Woodworking is one of the best hobbies out there. You can create many functional pieces on which you’ll feel proud of making them. Another advantage of woodworking is that you can create many home decors without extending your budget. And if you think that you need to be a professional woodworker for creating DIY wooden pieces then you’re wrong. There are many woodworking plans you can download for absolutely free for your desired project.

You can start your woodworking journey with small articles at first and once you get the hang of it, you can work your way up!

You can begin with small projects like a coffee table, sofa sleeve, birdhouse. There are tons of tutorials, woodworking plans, furniture plans that are specially designed for beginners. Here are our favourite easy and functional DIY Woodworking projects you can try out!

Note: You can contact us via email for ebook for 50 free Woodworking projects ebook.

24 Best DIY Woodworking Projects Ideas for Beginners

DIY Wooden Coasters – One of The Easiest Woodworking Projects For Beginners

You don’t need to buy the coasters for two reasons. First, they are unnecessarily expensive and second they are very easy to make. You can create customized wooden coasters on your own.

DIY Wooden Arrow

Wooden arrows make great wall decors. They are simple to make but look better than those expensive and fancy decors. In fact, any kind of wooden decor adds a rustic edge to space. Either nail these arrows on the wall or on your existing wooden doors at the front, it’s totally up to you. This DIY home decor will look great no matter where it is placed.

DIY Wooden Doormat

You can get rid of your annoying soggy doormats by making a good looking wooden doormat. It is easy plus looks very stylish. So, no need to worry about your mats getting wet and dirty in rain. What a cool and budget-friendly idea!! Isn’t it?

DIY Wooden Sofa Sleeve – An Elegant Drink Holder

If you’re in no mood of congesting your rooms with additional tables and furniture, this is the best idea for you. You can create a simple yet elegant couch sleeve in a couple of hours. These wooden sleeves are of great use. You can put your drinks while lounging on them.

 DIY Wooden Serving Tray

Your guests will surely be impressed when you serve them drinks and breakfast in a self-made wooden tray. You will also get an opportunity to showcase your skills. This is a great woodworking project for beginners.

DIY Wooden Wine Rack

Wooden wine racks are aesthetically-pleasing! They can actually enhance the look of your space. Even if you’re not a wine person, these racks can be used to put other showpieces. What’s even better? Gift them to your friends, they’ll surely appreciate it!

DIY Wooden Beer Caddy

Who doesn’t like beer? If you’re into beer more than anything then you’ll surely enjoy this woodworking project. With a little guidance, you can easily create a rustic beer caddy. Just like wine racks, these also make great gifts.

DIY Wooden Tray For Bathroom

Bathrooms are not meant to be boring. While it’s true that we don’t spend much time there, the little we do is great for relaxing. You can make simple bathtub trays to keep candles, indoor plants in your bathroom. It is again very easy to make and you can show your creativity by playing with the designs.

DIY Candle Holder /Pallets

A candle or cute little tea light holders are very useful and come handy at special occasions when you need to decorate your house. This woodworking project is budget-friendly and gets ready in no time. All you need is a simple powerful tool to get your job done!!

DIY Wooden Chopping Board

Although you can get a variety of cutting boards in the market, the DIY ones are pretty long-lasting and are of better quality, to be honest. You can start working on wood with this simple project. You can easily find many tutorials on the Internet for this purpose.

DIY Wooden Earring Holder

If you have a wonderful collection of earrings then why not showcase it? Yes! Instead of buying expensive wall arts, you can use your jewellery to create a wonderful display in your room. It will completely transform the view of that place and will add a cool boho touch. Plus, this is a one-of-its-kind piece!

DIY Giant Yard Dice

If you are looking for garden makeover ideas then this DIY project will surely work for you. These huge wooden dice look great in the lawns and yards. They not only look good but also make great seating arrangements for your family gatherings in the summer!

DIY Wooden Key Holder

We all lose keys at the time we need them the most. This situation happens quite often and is very annoying. To put an end to this, you can design and create a stylish key holder which you can nail on your doors or walls. Anyone can create this simple wooden piece. The best part is, you don’t need a lot of tools to create this.

DIY Wooden Laptop Desk

Let’s face it! We all love working in our beds. While it is very comfortable, it can cause posture issues. Lapdesk comes very handy in such situations. The best part is, you can easily create it using simple supplies. If you’re more creative, you can create a folding laptop table.

DIY Wooden Lamp shed

Add a classy touch to your place by creating a unique wooden lamp. It may look a bit difficult at first but it is actually simple to make. With a little planning and creativity, you can create your own decorative pieces while staying within the budget.

DIY Wooden Photo Frames

Photo frames are an integral part of the home decoration. We always look for stylish photo holders for displaying our pictures. But why waste a handful bucks on the things you can create yourself? Photo frames are very simple to make. You can make them in different shapes and sizes according to your likes. They look very interesting and are way cheaper than the ones you buy online!

DIY Wooden Spatula and Bowls

Yes! You can create the wooden utensils. They are very easy and useful. It’s totally your call whether you want to use them as decorative pieces or for the real kitchen use. They work great both the ways!

Note: You can contact us via email for ebook for 50 free Woodworking projects ebook.

DIY Wooden Pet Bed

Why not make a cute bed for your fur buddy? They will surely love you for this. With a simple plan, you will be able to make a simple wooden bed for your pets. Just throw in some mats and cushions and a comfortable and comfy bed is ready!

DIY Wooden Pen Holder

For making this project, you only need a piece of wood and an electric drill. All you have to do is drill the holes in the wooden log to create your own pen holder. You can decorate it using different colored paints. This will look great on your desk.

DIY Wooden Sign

Wooden signs are in trend these days. You can mount them almost everywhere. Be it your office lobbies, living rooms or plain boring walls, they will surely enhance the look of your place. Although you can buy the signs, they are very costly. Also, making these is easier than they look!

DIY Wooden Coffee Table

Once you get comfortable on woodworking projects, you can move on to create DIY simple pieces of furniture. A coffee table is the easiest thing you can begin with. The best thing is, you can easily get the assembly parts at your local home depot, you just need to create a wooden board and assemble the readymade legs.

woodworking projects

DIY Wall Planter Cum Nameplate

Display your wood

working skills to each of your visitors by creating a wall planter cum nameplate. It will be the first thing your guests see. You can add cute little indoor plants and perennials to make it look amazing. This project doesn’t require any special tools and expert advice.

DIY Plant Hanger

Planters are very versatile. You can keep them anywhere to liven up the place. The best way to incorporate plants indoors is by using these wooden plant hangers. They look very stylish and double as great decor. Make this cool DIY hanger that will remind you of your accomplishment every time you see it.

DIY Modern Lawn Chair

Finally, when you get smooth hands-on woodworking projects, you can begin with bigger furniture. You don’t need to worry as there are lots of free furniture plans on the Internet. One good idea is to make a modern lawn chair. You just need some simple tools and a few supplies. By following an easy tutorial, you can definitely make modern furniture on your own.

There you have it!! You will surely enjoy these woodworking projects. These are easy to make but look great. A trip to your local hardware shop and you will be able to make beautiful wooden articles on your own!

Source: Homedit
Source: Ali53 Woodwork

Woodworking Projects, Furniture Plans,Woodworking Plans And Shed Plans :

In my opinion having a furniture plans is very important as without having a proper furniture plans can ruin the whole experience of finally ending up having a great piece of furniture because without plan all the time , energy and money invested in the project can be wasted. Here are examples of lot of free furniture plans over the web.

What are some good woodworking projects ?

1) DIY Modern Lawn Chair
2) DIY Wooden Spatula and Bowls
3) DIY Plant Hanger
4) DIY Wooden Wine Rack
5) DIY Wooden Doormat
6) DIY Wooden Sofa Sleeve

Is woodworking hard to learn ?

Whole life is not enough to learn woodworking, its a continuous life long learning process. Woodworking may sound tough but its easy to learn, as you have to only focus on learning the plans regarding the product you going to build.

woodworking project